Slave Lake Area Update

 

Firefighters urge everyone to continue to use caution when working or recreating outdoors this fall, as grass fires will become the concern. Fine fire fuels such as dead grass require only a few hours of warm temperatures to become dry and flammable. Any spark, friction or hot exhaust in areas of dead dry grass can cause a fast moving wildfire. Make sure your campfire is extinguished and when riding your off-highway vehicle stop frequently to remove debris from your machine's hot spots.

Report wildfires by calling 310-FIRE(3473).

SWF116 occurred on July 7th and is located approximately 22 kilometres northwest of Chipewyan Lake. The lightning caused wildfire is classified as being held and is 10,670.00 hectares in size. Being held means with the current weather conditions and resources, the wildfire is not anticipated to grow past expected boundaries. Firefighters with a helicopter are monitoring this wildfire. 

The wildfires in the Saulteaux Complex (SWF 085, SWF086 and SWF087) and Grizzly Complex (SWF057, SWF063, SWF064 and SWF095) are under control. 

SWF103 occurred on June 21 and is located 30 kilometres northeast of Red Earth Creek. The wildfire is under control and has burned 40.5 hectares. 

SWF068 is located approximately six kilometres northwest of Peavine Metis Settlement. The wildfire is under control and has burned 143,039.00 hectares. Firefighting operations are being conducted by the Peace River Forest Area. For information on this wildfire visit the Peace River Wildfire Update.

SW060 is located 2.3 kilometres east of the border of the Whitefish Lake First Nation. This wildfire is under control and has burned approximately 43,981 hectares. 

To view wildfires on a map, download the AB Wildfire App or visit the Alberta Wildfire Status Dashboard

NOTE: The wildfire perimeter is an estimate based on measurements such as GPS, aerial scanning and satellite imagery. This estimated perimeter can change as more accurate measurements become available. Areas within the fire perimeter may not have been affected by wildfire.

Fire Permits 

From March 1 to October 31, fire permits are required for any burning, except campfires, in the Forest Protection Area of Alberta.

Fire permits help us track what is burning on the landscape. If you are burning without a permit or not following permit conditions, your fire could be considered a wildfire and you could be fined and may be responsible for the costs of suppressing the fire. By getting a fire permit, you help keep our firefighters free to fight real wildfires instead of responding to the smoke in your backyard.

Fire permits are free and are now available online. Visit firepermits.alberta.ca for information on how to make a request online.

Fire permits are also still available, by request, from your local Forestry Office.

• • Wabasca 780-891-3860
  • Slave Lake 780-849-7377
  • High Prairie 780-523-6619  

Do your part to prevent wildfires

When using any type of machinery including off-highway vehicles take the following precautions:

• Clear debris from moving parts.

• Check your muffler.

• Keep the equipment in good repair.

• Avoid operating equipment in tall grass.

• Keep watch of your surroundings.

• Always carry firefighting equipment on board, a fire extinguisher, axe, shovel and a receptacle filled with at least five litres of water.  

When having a campfire, keep it small, safe and always attended. When you are leaving your site or headed to bed, your campfire must be extinguished. 

When putting out your campfire:

• Spread the embers within the fire pit, then add water or loose dirt and stir.

• Expose any materials still burning, then add more water and stir again until you can no longer see smoke or steam.

• Repeat until your campfire is cool to the touch. You should not be able to feel any heat from the ashes.

FireSmart

Visit firesmartcanada.ca to learn how you can reduce the risk of wildfire to your home, property and community.

The wildfire dashboard provides up-to-date wildfire information at the click of a button. This interactive tool displays important statistics on the number of active wildfires in the province, sizes, locations, suspected causes and more. The dashboard builds on the former wildfire status map by displaying the most frequently accessed information in one convenient location.

Download the Alberta Wildfire app and get access to accurate, real-time information on wildfires in your area. You can also find information on fire advisories, restrictions and bans across the province and much more all on your mobile device. Available for Apple and Android.

Subscribe to the Slave Lake Forest Area Wildfire Update to receive an email when new information is posted.