WILDFIRE DANGER
The wildfire danger is HIGH for the Fort McMurray Forest Area north of Lake Athabasca and LOW south of Lake Athabasca. The fire restriction for areas north of Lake Athabasca has been removed. Please be very cautious when recreating outdoors as we are entering an uptrend where wildfires can ignite easily and spread quickly.
Report wildfires immediately by calling 310-FIRE (3473).
SMOKY CONDITIONS
Due to the numerous wildfires in Alberta and other parts of Canada, smoky conditions will continue. Anyone with health concerns should visit Alberta Health Services or call 811 for health advice from Alberta Health Link. Before travelling check www.511.Alberta.ca for information the latest road conditions or closures. Visit www.firesmoke.ca to see where the smoke is coming from and to view wildfires on a map, download the AB Wildfire App or visit the Alberta Wildfire Status Dashboard.
FORT MCMURRAY WILDFIRE UPDATE
Since January 1, 2023 there have been 58 wildfires in the Fort McMurray Forest Area, burning a total of approximately 326,102 hectares (ha).
MWF021 was detected on May 27 and is located approximate 38 km south of Wood Buffalo National Park. This wildfire is classified as under control (UC) and is 14,760 ha in size. This wildfire was caused by lightning.
MWF023 was detected May 28 and is located near Birch Mountains Wildland Provincial Park. This wildfire is classified as under control (UC) and is 54,639 ha in size. This wildfire was caused by lightning.
MWF024 was detected May 28 and is located east of Marguerite River Wildland Provincial Park. This wildfire is classified as under control (UC) and is approximately 28,454 ha in size. This wildfire was caused by lightning.
MWF025 was detected May 28 and is located approximately 7 km north of Fort Chipewyan. This wildfire is classified as being held and is approximately 95,491 ha in size. This wildfire was caused by lightning.
This wildfire no longer poses a threat to the community of Fort Chipewyan, Allison Bay, Dog Head, or the Fort Chipewyan airport. Eighty per cent of the entire wildfire perimeter is controlled, which includes the entire south perimeter.
For the most recent map of MWF025, click here.
MWF026 was detected May 28 and is located northeast of Marguerite River Wildland Provincial Park. This wildfire is classified as under control (UC) and is approximately 1,705 ha in size. This wildfire was caused by lightning.
MWF030 was detected on June 4 and is located near La Butte Creek. This wildfire is classified as being held and is 7.4 ha in size. This wildfire was caused by lightning.
MWF038 was detected on June 29 and is located approximately 6 km north of the Slave Lake/Fort McMurray Forest Area border. This wildfire is classified as under control (UC) and is approximately 569 ha in size. This wildfire was caused by lightning.
MWF039 was detected on June 29 and is located within Birch Mountains Wildland Provincial Park but has crossed over into the Slave Lake Forest Area. This wildfire is classified as under control (UC) and is approximately 15,200 ha in size. This wildfire was caused by lightning.
MWF043 was detected on June 30 and is approximately 20 km southeast of Fort Fitzgerald. This wildfire is classified as being held and is approximately 108,555 ha in size. This wildfire was caused by lightning. To view actual locations of the wildfire, visit the wildfire dashboard. To view a digital map of this fire click here, or to see all fires around Fort Smith and Fort Fitzgerald, click here.
Today, we have a total of 80 personnel, which includes 51 firefighters, working on this wildfire. They are supported by seven helicopters. A fire camp and incident command post are established in Smith's Landing First Nation to support this wildfire.
We experienced minimal fire growth yesterday and today, and the wildfire did not come any closer to Fort Fitzgerald or Fort Smith. Visibility is good today and crews are out on the fireline.
Helicopters continue bucketing water on key locations along the wildfire perimeter. We have one unit crew working along the northwest flank, and three crews working across the Slave River, east of Hay Camp. There's another helitack crew working along the west flank of the fire. They are all working on strengthening the perimeter to ensure that it holds.
A structure protection unit (SPU) crew is continuing to maintain sprinkler systems and starting to demobilize some that are no longer required. These systems are set up in advance and then activated if the wildfire starts to get close to the structures being protected. Sprinklers are only activated when wildfire managers believe the structures could be in immediate risk. This limits the amount of time and effort required by the SPU to go back in and refuel the pumps, which needs to happen approximately every 12 hours to ensure they continue to function properly.
Once a wildfire burns around a structure that has been protected, a crew will go out to the value at risk and ensure that all hotspots are extinguished several meters into the burned area. Once they are confident that the structure is safe, they will demobilize and reallocate that equipment to another value to protect.
Saturday, we expect a high of 18C with 75 per cent relative humidity. Winds are forecasted to come from the south at 10 to 15 km/h as a cold front approaches, switching to northwesterly 10 to15 km/h behind the front on Saturday afternoon.
There is a 60 per cent chance of 2 to 4 mm of precipitation.
To find more information on wildfires in Wood Buffalo National Park, click here. To view wildfires in Northwest Territories, visit their interactive map and website by clicking here.
With significant smoke in and around Fort Smith, if you'd like to see where it's originating from and forecasts, you can visit firesmoke.ca and click on the interactive map.
MWF050 was detected on July 6 and is located approximately 5 km east of the Slave Lake Forest Area border and approximately 28 km south of Birch Mountains Wildland Provincial Park. This wildfire is classified as under control at approximately 60.80 ha in size. This wildfire was caused by lightning.
Mutual-aid wildfires:
ANT003 (SS022) was discovered on July 5, 2023 and is located approximately 25 km north of Fort Smith. It is approximately 96,806 ha in size and is classified as out of control. To view a digital map of this fire click here, or to see all fires around Fort Smith and Fort Fitzgerald, click here.
We experienced decreased fire growth yesterday. The wildfire is not get any closer to Fort Smith or Fort Fitzgerald. We are focused on controlling the south flank of this wildfire.
Currently, we have 63 personnel working on this wildfire. We have 50 firefighters, six support staff and seven helicopters. These include both Alberta and Northwest Territories resources.
We currently have helicopters bucketing on the southeast finger and the southwest edge. We also have two unit crews and two helitack crew working along the southeast finger of this fire. They are working to strengthen the perimeter. More resources are available if needed. Ignition specialists will continue to look for more opportunities to complete ignition operations, when conditions permit.
Experienced wildfire managers will keep their eye on smoke and visibility, as that can impact operations if it is too thick to safely fly.
To view more information, visit the Town of Fort Smith website.
A precautionary evacuation notice has been issued for the Town of Fort Smith, click here for more info.
MSZ001 is located on the Alberta/Saskatchewan border, just south of Lake Athabasca. This wildfire is classified as being held and is approximately 75 ha in size.
MNZ001 is located on the south edge of the Alberta/Wood Buffalo National Park border. This wildfire is classified as being held and is approximately 2,595 ha.
To view active wildfires across Alberta, click here.
PROVINCIAL WILDFIRE UPDATE
To see the forecasted fire danger click here, updates daily at 3:00 PM.
ON ALERT
Fire lookouts are on high alert constantly watching for smoke and firefighters in helicopters are assessing potential sightings of wildfires, ready to respond to any new wildfires that may start.
Wildland firefighters urge everyone to be extremely cautious when out in the Forest Protection Area. Check your winter burns, and comply with fire bans and OHV restrictions.
CAMPFIRE SAFETY
Remember to check www.albertafirebans.ca for fire advisories, bans or restrictions in your area or destination. If you are camping in a provincial or national park, check the rules and guidelines and be sure to follow them for your safety and the safety of other campers.
Safe wood campfires - should be within a metal, brick, or rock fire ring.
They are required to:
- be on rock, gravel, sand, or another non-combustible surface that extends at least one metre around the fire
- have a responsible person in attendance to keep fire under control at all times and extinguish before leaving
- have enough water on hand to extinguish the fire. Safe wood campfires on private lands include private land campgrounds and private land recreation areas.
Always let the fire burn down before you plan to extinguish it. Spread the embers within the fire pit, then add water or loose dirt and stir. Repeat until your campfire is cool to the touch. You should not be able to feel any heat from the ashes.
OHV SAFETY
If you plan on riding OHVs in the Forest Protection Area of Alberta, you can reduce the risk of your vehicle causing a wildfire by following these simple steps:
- Before you ride, clean out hot spots and remove debris from your machine.
- After riding through muskeg or tall grass, stop and remove any build-up from your machine.
- Carry firefighting equipment such as a small shovel, collapsible pail or fire extinguisher.
- Wash your OHV and keep it clean; do not wash in streams and creeks.
- Make sure your muffler and spark arrestor are working properly.
- Stop frequently. Take the time to knock debris from your machine’s hot spots. If the debris is smouldering, soak it, stir it, and soak it again to make sure it is extinguished.
For more information, see Off-highway vehicles: Wildfire prevention tips.
EXPLODING TARGETS AND FIREWORKS
The Forest and Prairie Protection Act and associated regulations applies to the shooting, ignition or detonation of exploding targets and fireworks on public lands and private lands located within the FPA.
A Forest Officer from the local forest area office may grant written permission to shoot, ignite or detonate exploding targets or fireworks in the FPA. Written permission of exploding targets and fireworks is based on current wildfire danger and managed on a case-by-case basis.
A fire advisory, restriction, ban or forest closure may prohibit or limit use of exploding targets and fireworks during high wildfire hazard situations within the FPA. Check Alberta Fire Bans or the mobile phone app for the latest information.
WILDFIRE DASHBOARD
The wildfire dashboard provides up-to-date wildfire information at the click of a button. This interactive tool displays important statistics on the number of active wildfires in the Forest Protection Area of Alberta, sizes, locations, suspected causes and more.
The dashboard builds on the former wildfire status map by displaying the most frequently accessed information in one convenient location.
CONTACT
Websites:
Alberta Wildfire, Alberta Fire Bans, FireSmart in Alberta, Alberta Emergency Alerts, Air Quality Health Index
Wildfire Smoke and Your Health, 511 Road Reports, and Emergency Preparation.
Social Media:
Join the conversation on
Apps:
Alberta Wildfire App for Apple or Android and Alberta Fire Bans App for Apple or Android.